basalt Materials input and output
The basalt crushing and screening production line equipment can process materials from 1000mm to 0-3mm. The configuration is flexible, the number of crushing stages can be reduced if necessary, and the investment cost is lower than that of the traditional production line with the same output.
The basalt stone blasted from the mountain is fed into the feeder by the dump truck, and then enters the jaw crusher for primary crushing; after being crushed to a reasonable degree of fineness by the jaw crusher, it is evenly sent to the counterattack crusher by the belt conveyor for further crushing;
After being crushed to a certain degree of fineness by a counterattack crusher, it forms a closed circuit with a circular vibrating screen for screening material.
The material that meets screened returns to counterattack for re-crushing forming a closed loop several times; The material that does not meet broken returns to vibration sieve form closed loop several times until all qualified materials are screened.
basalt crushing project
Production Process
The production process of the tph basalt crushing and screening production line equipment is as follows:
1. The basalt stone is fed into the jaw crusher by the vibrating feeder for primary crushing.
2. The crushed basalt stone is then transported to the cone crusher for secondary crushing.
3. The tertiary stage of crushing takes place in the impact crusher.
4. Finally, the basalt particles are screened in the vibrating screen and are divided into different sizes according to their applications.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
