marble crushing process machines config
As we all know, the marble is a relatively hard material, which requires the crushing equipment with good wear resistance and high reliability. Therefore, when choosing the marble crushing and screening equipment manufactory, we should pay attention to its strength and reputation. Here, I will introduce you some tips about how to choose a good manufactory.
First of all, we should confirm whether the manufactory has enough production strength. A good manufactory should have its own advanced production technology and perfect quality control system. In addition, it should also have a team of experienced engineers to provide technical support.
C6X04 marble jaw crusher
Secondly, we should pay attention to the after-sales service of the manufacturer. A good manufacturer should have a professional after-sales team to provide timely and effective solutions for any problems you may encounter during use.
Finally, we need to consider the price of the equipment. Of course, we want to get a high-quality machine at a reasonable price. However, we should also be aware that there is no such thing as a “cheap” machine with good quality. So we need to find a balance between price and quality when choosing a machine.
marble jaw crusher working princple
The working principle of the marble jaw crusher is very simple. The motor drives the belt and pulley to make the movable jaw move up and down through the eccentric shaft. When the movable jaw rises, the angle between the toggle plate and the movable jaw becomes larger, pushing the movable jaw plate closer to the fixed jaw plate. At the same time, materials are crushed or split pieces. When the moving jaw decreases, the angle between the toggle plate and moving jaw becomes smaller, and tension rods that pull back spring release, pulling backtoggle seat, so that a decrease in movingjaw plate close to fixedjaw plate while atthe same time ,the material iscrushed or splitting pieces . Adjusting discharge port size: turn two adjusting screw nut ,can regulate discharge port size ,make sure of safety production.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
