Different from LIMING Nyrstar NV (Nryster) zinc smelting technoly overview
Among metallics, some are fundamental to our way of life: iron, copper, lead, zinc, nickel, aluminum and magnesium. Of almost equal importance are the alloying metals such as manganese, chromium, molybdenum and tungsten. The industrial minerals (limestone, sulphur, salt and fluorspar among others) supply the raw materials for much of our chemical industry, and the mineral fertilizers, phosphate rock and potash, are of vital importance in agriculture.
Nyrstar NV (Nryster) is a Belgium-based zinc smelting Company, they adopt many advanced zinc smelting technology in Canada.
Nyrstar’s mining segment through nine of its mines deal with the production of nickel, zinc, copper, lead, silver, lead, gold and cobalt concentrates and by-products of some of these metals and crushed rock,. The operating mines includes the Campo Morado mine in Mexico; Contonga and Pucarrajo and Coricancha mine in Peru, El Mochito in Honduras, El Toqui in Chile, Langlois and Myra Falls in Canada, Talvivaara in Finland, and the Tennessee mine in the US.
Geographically, the company operates in Europe, the Americas, Australia, Asia and Other. For FY2010, Europe accounted for 48.4% of the company’s total revenue, followed by Australia with 26.4%, Asia with 14.4%, the Americas with 10.2% and other with 0.6%.
LIMING Supply new type hpt hydraulic cone crusher which adopt Genermany advanced technology for zinc beneficition plants.
Primary machines: PEW Series Jaw Crusher
Secondary machines: htc hydraulic cone crusher
Beneficiation machines: vibriating feeder, ball mills machines
Capacity :100ton- 600ton per hour
After sale :10 years free service for you
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
