In generally speaking, Every Jaw crusher manufacturers will supply mining and minerals processing equipment and services for the new gold ore processing plant of South Africa . The equipment delivery will be completed during, and the start of commissioning of the concentrator will be after our Installation Engineer.
Gold beneficition capacity used European Jaw Crushers PEW:
As well as related supervision, start-up and commissioning services.The equipment and services will be delivered to the mined Gold project. Our European Jaw Crushers PEW as the primary crusher durnin the whole gold mining plant, it can crush larger size gold ore, then belt the small size gold to the next crushing projects which usually used the impact crusher, cone crusher, so choose the better crusher is very important for the high quality and larger capacity, or it will made great economic loss, delay the construction period. The annual processing capacity of the plant will be 1000 tons of dry gold ore.
European Jaw Crushers Questions when working Gold Beneficiation:
When crushing gold mineral, less aggressive type rocks, greater single pass reduction can be achieved by using an anvil type crushing chamber. European Jaw Crushers PEW produce a greater percent passing the sieve sizes from 1 1/2″ to 3/16″ (40 mm to 5 mm) in a single pass. As the anvil chambers wear, there will be a gradual coarsening of the crusher discharge. In more abrasive materials, this may happen in days or weeks and may be noticeable by the increase in circulating load. In milder, less aggressive rock, this condition may take months or years to develop.
Of course, in the whole Gold mining process, regardless of any problems, our installation engineers will give the perfect solution to our customers.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
