Coal ball mills are used primary for single stage fine grinding, regrinding, and as the second stage in two stage grinding circuits. According to the need of customers, ball mill can be either wet or dry designs. These mills are sized from 2 t/h to 30 TPH for wet grinding and from 0.5 t/h to 30 TPH for dry grinding. Ball mills have been designed in standard sizes of the final products between 0.074 mm and 0.4 mm in diameter. Feed size of our coal ball mill can be smaller than 25mm.
Coal ball mills in power plant process flow
Raw coal enters the top of the pulverizer through the raw coal feed pipe. The raw coal is then pulverized between the roll and rotating ring. Hot air is forced in through the bottom of the pulverizing chamber to remove unwanted moisture and transport the coal dust up through the top of the pulverizer and out the exhaust pipe directly to the burner. Coal that has not been pulverized into fine enough particles cannot be blown out of the top of the unit; it falls back to the ring and roll to be further pulverized. Ball Coal milling have been used across a wide range of industries and applications, such as paints, pigments, pharmaceuticals, ceramics and coal slurries. The attrition mill could be considered on the other end of the loose generic description of stirred media or stirred ball mills. Similarly, some have classified the vertical ball mill as being in the family of attrition mills.
Coal ball mills manufactures
We are professional and large coal mill manufacture in China, and we supply many kinds of coal grinding equipments, such as Vertical mill, Trapezium mill, Ball mill, Raymond mill, etc. Our coal mills are popular in many countries, such as India, Nigeria, Germany, Bangladesh, Iran , Malaysia ,Turkey, Italy, Singpore, Chile,Libya, Philippines, Australia ,Saudi Arabia,Indonesia, Pakistan, Angola, Tajikistan ,Dubai, Brazilon,Peru , Mexico, South Africa, Kenya, Algeria , Eygpt, Ghana , Zimbabwe, Sri Lanka and so on.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
