At present, with the development of mining industry, more and more mineral pulverizers have mushroomed rapidly. But in the working process of crusher, it often causes great influence on machines’ production because of some factors. So how to make mineral pulverizing techniques to get more output?
1. The Structure of Organism
The internal structure, material and gap between mineral pulverizers also affects their production ability. The mineral pulverizers produced by us consists of main frame, horizontal axism, balance wheel, eccentric shafts, crushing wall(fixed on the wall), hydraulic coupling, lubricating system, hydraulic system and control system etc. Its accessories have high wearability, safe and reliable, and it adopts advanced technology from Germany. They have the less consumption of spare parts, reliable operation, convenient maintenance and strict structure.
2. Dynamic difference.
The power and speed is the combination of mineral pulverizers’ contradictions and sameness. It will play a great role in increasing crushing output and maintaining the normal continuos work. You had better use the power recommended by engineers because they have a good knowleage of equipments and products and rich experience.
3. The Rationality of Auxiliary Machinery.
The feeding and elevating, screening, cooling and dusting of mineral pulverizers’ effective and reasonable colloation, to a certain extent, restricts crushing yield and efficiency. Let the conveyors’ specification adjusts to the maximum handling capacity of crusher. And make the proper selection of advanced sieving and closed-circuit sieving specifications. The mineral pulverizers researched by us has the efficacy of cooling and dusting, fundamentally solved the short service life time of internal parts of mineral pulverizers.
Through the above summary, we hope customers can have a deeper understanding of how to get more output , which not only can improve the production efficency of cone crusher but also can save cost, meanwhile create more economic benefit for customers.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
