How to use the 1000tph large sand making machine?
Assuming that you have a 1000tph large sand making machine, the first thing you need to do is identify the project or application for which you will be using the machine. Once you have determined the purpose of the machine, you need to set up a work area. This may require clearing a space in your yard or garage, or renting a space at a local construction site. Once you have a work area set up, you can begin to operate the machine.
sand crusher VSI6X
The first step is to add sand to the hopper. The amount of sand that you need to add will depend on the size of your project. Once you have added the appropriate amount of sand, you will need to add water to the mixture. The amount of water that you need to add will also depend on the size of your project. After adding water, you will need to mix the sand and water together until it forms a slurry.
Once the slurry is mixed, you can begin to feed it into the machine. The rate at which you feed the slurry into the machine will depend on the size of your project. If you are working on a small project, you can feed the slurry into the machine slowly. If you are working on a large project, you will need to feed the slurry into the machine faster.
As the slurry is fed into 1000tph large sand making machine, it will begin to spin. The spinning motion will cause the slurry to
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
