Technical Data of Secondary Cone Crusher

Secondary Cone Crusher Description

The cone crusher represents the secondary stage of the stone crushing process and is considered therefore to be the secondary crusher. Two secondary cone crushers namely will be installed to carry out the secondary crushing process.

Technical Data of Secondary Cone Crusher

The materials (nominal size 200mm to 250mm) from the primary jaw crusher are fed into the cone crusher as a secondary crushing process which further reduces the size of the rocks into aggregate sizes equal to or less than 75mm. The spalls are fed to the cone crusher through two vibrating feeders.

Water misters will be installed at the discharge points of the cone crusher to suppress dust emissions.

Technical Data of Secondary Cone Crusher

Type Max. input (mm) Adjusting range of output (mm) Capacity (t/h) Motor power (kW) weight (t) Overall dimensions (L×W×H)(mm)
PYB 600 65 12-25 12-25 30 5 2800×1300×1700
PYD 35 3-15 5-23 5.5
PYB 900 115 15-50 50-90 55 10.2 3050×1640×2350
PYZ 60 5-20 20-65 10.2
PYD 40 3-13 15-50 10.3
PYB 1200 145 20-50 110-200 110 24.7 4152×2300×2980
PYZ 100 8-26 50-150 25
PYD 50 3-15 18-105 25.6
PYB 1750 215 25-60 280-480 160 50.3 4870×3800×4192
PYZ 185 10-30 115-320 50.3
PYD 85 5-15 75-230 50.4
PYB 2200 300 30-60 590-1000 260-280 80 7705×3430×4852
PYZ 230 10-30 200-580 80
PYD 100 5-15 120-340 81.4

We have different model cone crusher, so if you are interested in our cone crusher, we will help you select a suitable product according your actual needs.

This entry was posted in Crusher Technology, Crushing Plant and tagged , . Bookmark the permalink.