Most advanced Grinding Processing Technology Introduction all over the world
Fineness: 30 mesh to 400 mesh
Configuration machines: mainly by jaw crusher, bucket elevator, electromagnetic vibrating feeder, LM Vertical Roller Mill Machines, host and so on.
Applications Industry: Grinding Processing Technology is widely used in building materials, chemicals, fertilizer, metallurgy, mining, refractory, ceramic, steel, thermal power, coal and other industries.
Applicable materials: cement (raw clinker), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, etc. Mohs hardness of 9 or less, and various non-explosive mineral materials humidity below 6% of grinding operations.
Most advanced Grinding Processing Technology overview:
Most advanced Grinding Processing Technology process usually consists of Primary PE series jaw crusher, bucket elevator, electromagnetic vibrating feeder, milling machine host, analysis machine (separator), auxiliary equipment, fans, centralized electric control equipment. According to the different needs of mill production line user selectable configure other devices such as:LM Series Vertical Roller Mill. Raymond mill, three-ring medium speed micro powder mill, etc.
Bulk materials after jaw crusher, by the bucket elevator to the storage silo, the material evenly through electromagnetic vibrating feeder, quantitative, continuous grinding to polishing chamber, powder milled in blower blow the role of separator sorting, unqualified powder fall after sorting continue grinding, qualified powder by pipeline to the storage silo, the final discharge valve output is finished powder. The entire process flow under negative pressure, air volume increased air circulation duct section through the middle of the exhaust fan and the host pipe discharging into the small cyclone collector, for purification.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
