T
Cobalt Carbonate Crushing
he Benefits of 200tph Cobalt Carbonate Crushing and Milling
The main cobalt carbonate minerals are cobaltite and linnaeite, and the main mineral impurities are quartz, calcite, dolomite, pyrrhotite, magnetite, siderite and so on. The Mohs hardness of cobalt carbonate is 3.5-4.0. It can be crushed by jaw crusher and hammer crusher to smaller particles, and then milled into powder by ball mill or other grinding machines.
The capacity of 200tph cobalt carbonate crushing and milling line is 20-25t/h. On this line, the European type jaw crusher PEW250*1200 is used as primary crushing equipment to crush the cobalt carbonate into smaller particles with diameter about 10mm. Then the crushed materials will be sent to secondary crushing stage for further size reduction by impact crusher or cone crusher. And then the materials will be sent to ball mill for grinding into powder with required particle size.
There are many benefits of 200tph cobalt carbonate crushing and milling line. First of all, it can effectively improve the recovery rate of cobalt in later beneficiation process; Secondly, it can reduce energy consumption and save production costs; Thirdly, it has high production efficiency and good product quality; Fourthly, it has advanced technology and stable performance; Finally, it is easy to operate and maintain.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
