New Type C6X Series Jaw Crusher Instruction

C6X series jaw crusher is a well-known rock and mineral processing equipment in the industry, which can perform primary and secondary crushing of various hard and abrasive ores and rocks. It has a detachable non-welding structure frame, optimized cavity structure, double wedge adjustment device, selected raw materials and components, elastic limit shock absorber, integrated motor base and other special designs, high crushing efficiency, investment Low cost, long service life and stability.

C6X series jaw crusher is mainly composed of frame body components, jaw plate installation components, movable jaw components, wheel components, adjustment device components, transmission tension components, foot installation components, feed hopper (optional) and protection Cover (optional) and other parts.

The C6X series jaw crusher is usually driven by a motor as the power source. The motor inputs the power to the pulley through the SPC belt, and the pulley drives the eccentric shaft to rotate to drive the movable jaw body to swing back and forth up and down. When the movable jaw moves close to the fixed jaw, the volume of the crushing cavity decreases, and the materials in the crushing cavity are squeezed or chopped. When the movable jaw moves away from the fixed jaw, the volume of the crushing cavity becomes larger, and the The crushed small pieces of material are discharged from the discharge port to make continuous circular motion to realize the crushing operation.

Optimizing crushing chamber and trajectory parameters of moving jaw can get reasonable inertial moment and crushing stroke, and higher efficiency will be obtained when energy consumption is equal to others.

Replacing welded machine with bolted fastening, the structure is more compact because the problem about stress concentration caused by welding is avoid.

Replacing plates with wedges, the discharge opening can be adjusted simply, efficiently and safely.

jaw crusher Working Principle

Input dynamic by motor, the pulley drives eccentric shaft to make the movable jaw move upwards and downwards with SPC belt. When the movable jaw moves forth toward the fixed jaw, materials in the crushing cavity will be squashed or chopped. And then the movable jaw travels back, the chopped or squashed materials which met the requirements will be discharged from the outlet. Since the motor keeps working, the crusher will crush and discharge periodically to achieve mass production.

Specifications – Technical Data

Model Feed opening size(mm) Max Input size(mm) Outlet Adjustment Range(mm) Processing Capacity
Speed(r/min) Power(kw) Dimension
C6X80 520×800 420 60-150 80-290 350 75 2650×1540×1780
C6X100 760×1000 630 70-175 130-420 260 110 3700×2440×2520
C6X110 850×1100 720 80-200 160-550 230 160 3800×2450×2550
C6X125 950×1250 800 100-250 230-760 220 160 4100×2750×2780
C6X145 1100×1450 920 125-275 320-950 220 200 4400×3060×3210
C6X160 1200×1600 1020 150-300 410-1150 220 250 5700×3650×3550
C6X200 1500×2000 1200 175-300 610-1510 200 400 6500×3990×4260
This entry was posted in Argentina Crusher, Australia Crusher, Crusher Type. Bookmark the permalink.