Brief introduction of 1000tph iron ore slag recovery crushing mill
Are you ready to learn about the game-changing technology that’s revolutionizing the iron ore industry? Look no further than the 1000tph iron ore slag recovery crushing mill. This innovative machine is designed to not only crush and recover valuable materials from slag, but also reduce waste and increase efficiency in mining operations. If you’re curious about how this cutting-edge equipment works and its potential impact on the industry, keep reading for a brief introduction.
Brief introduction of 1000tph iron ore slag recovery crushing mill
The process of iron ore slag recovery crushing mill
The process of iron ore slag recovery crushing mill is very important for the comprehensive utilization of iron ore slag. It can not only realize the recycling of iron and steel, but also make full use of the valuable components in iron ore slag, such as SiO_2, Al_2O_3, CaO, MgO, etc. The recovery process of iron ore slag generally includes crushing, magnetic separation and flotation.
Crushing: The first step in recovering iron from iron ore slag is to crush the material into small pieces using a crusher. This will make it easier to separate the steel from the slag.
Magnetic separation: Next, a magnetic separator is used to separate the steel from the rest of the slag. This step is crucial in ensuring that all valuable components are recovered from the slag.
Flotation: Finally, the last step in recovering iron from slag is to float away any remaining impurities using a flotation machine. This ensures that all valuable materials are separated and can be used again.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
