How to run the hammer crusher?
To effectively run the hammer crusher, follow these six steps:
1. Check if all the components of the hammer crusher are in good condition before starting it. Ensure that there is no loose part or any damage.
2. Load the raw materials into the hopper and adjust the feeding amount to avoid overloading which can cause damage to your equipment.
How to run the hammer crusher?
3. Turn on the power supply, press start button and wait for some time until you hear a humming sound indicating that it has started running smoothly.
4. Observe your hammer crusher while it’s working; make sure that there are no unusual noises or vibrations as this could mean something is wrong with your equipment.
5. Adjusting speed control should be done according to crushing requirements so as not to overload or underload which might affect productivity negatively
6. After completion of work, turn off your equipment properly by pressing stop button first then unplugging from electrical outlet after cooling down period of around 10 minutes.
By following these simple steps, you can ensure smooth operation of your hammer crusher machine without encountering any problems along the way!
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
