Installation guide for 300tph impact crusher
Before installing your 300tph impact crusher, there are a few things you need to consider. First, ensure that the ground is flat and levelled, and that you have enough space for the crusher and its components. You will also need to plan out the electrical connections required for the crusher to function properly.
Once you have prepared the site, it’s time to start assembling your impact crusher. Begin by unloading all of the parts and checking them against the list provided in your user manual. Follow each step carefully as outlined in the instructions, making sure to tighten bolts securely as needed.
Installation guide for 300tph impact crusher
When installing conveyor belts or hoppers, be sure they are correctly aligned with one another before tightening any nuts or bolts. Also take note of any lubrication points on bearings or other moving parts during assembly.
After installation is complete, it’s essential to conduct a thorough inspection of every component before starting up your machine for operation. Check everything from belts and pulleys down to wiring connections.
By following these steps carefully when installing your 300tph impact crusher, you can ensure safe and efficient operation while minimizing downtime due to malfunctions caused by improper installation procedures
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
