The working principle of the construction waste mobile vsi5x sand crusher
The working principle of the construction waste mobile VSI5X sand crusher is based on the concept of “stone hitting stone”. This means that the materials are continuously impacted and crushed by the high-speed rotating impeller in the crushing chamber. As a result, they are finely ground and shaped into particles with a uniform size.
When construction waste enters the crusher, it is first fed into the hopper. Then, it goes through the vibrating feeder which evenly distributes the materials onto the conveyor belt. The belt transports them to the main crushing chamber where they come into contact with the rotating impeller.
The working principle of the construction waste mobile vsi5x sand crusher
The impeller accelerates and throws them against anvil rings located in different layers within the crushing chamber. This collision process not only breaks down larger pieces but also reshapes them into smaller and more uniform particles. The crushed materials then pass through multiple screening layers to separate those that meet specific size requirements from oversized ones.
By utilizing this efficient working principle, construction waste can be effectively processed and transformed into valuable aggregates or sand for various applications such as road construction or building projects. It offers a sustainable solution for reducing landfill waste while contributing to environmental protection efforts.
Understanding how a construction waste mobile VSI5X sand crusher works provides insight into its operational efficiency and helps maximize its potential in processing waste materials effectively.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
