Trial operation for calcium carbonate grinding
Before fully operating the calcium carbonate grinding production line, it is essential to conduct trial operations. This step ensures that the equipment is functioning correctly and efficiently, avoiding any potential problems in the future.
During the trial operation, operators need to check if all parts of the system are connected correctly and running smoothly. They should also verify that there are no leaks or blockages within pipes and valves.
Trial operation for calcium carbonate grinding
Once everything is verified, start with a low-speed operation for 2-3 hours while monitoring the machine’s performance. During this time, operators should observe if there are unwanted vibrations feeder or noises coming from equipment.
After successfully completing the low-speed test run, it’s time to increase speed gradually until reaching a maximum capacity level. It’s crucial not to overwork machines during their first run as they may get damaged easily when pushed beyond their limits.
Record all findings during trial runs such as temperatures of bearings and motors before making adjustments based on observations made during these tests. By conducting proper trial operations with accurate documentation recording results can help avoid significant issues later on in production.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
