feldspar crushing plant design step
There are three main steps in designing a good feldspar crushing plant: process design, equipment selection, and layout. The first two are dictated by production requirements and design parameters, but the layout can reflect the input, preferences and operational experience of a number of parties. These can include the owner’s engineering staff, safety personnel, operations and maintenance personnel, equipment manufacturers, and the engineering consultant. Ideally, the consultant combines his knowledge and experience with an understanding of all parties’ needs, to provide a balanced, workable, safe and economic plant design.
feldspar crushing plant design parameters
The principal design parameters that drive feldspar crushing plant selection and configuration include:
• Production requirements
• Capital cost
• Ore characteristics
• Safety and environment
• Project location • Life of mine/expansion plans
• Operational considerations
• Maintenance requirements
• Climatic conditions
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
