200 TPH desulfurized gypsum production line
Crusher to break large size gypsum ore into small particles of less than 30 mm, conveying to the mill for grinding, the classifier will be grinding fineness products required after calcined gypsum raw powder into the fluidized bed, the rest back to mill for grinding again until qualified.
Five system process
Building gypsum production line according to the technical requirement is usually divided into five parts, respectively is crushing system, the loading transmission system, grinding system, burning system, and electric control system.
Need equipment including jaw crusher, euro grinder, overpressure trapezium mill, selected three kinds of desulfurization gypsum production line equipment, reliable, convenient and the adjusting range is big, the improvement of yield and the ability to feed, humanized design, easy to operate
Advanced and reliable, pay attention to environmental protection concept.
Its broken than big, product granularity
Mainly used in metallurgy, building materials, chemical, mining, highway construction.
- Wecolme to our website, please chat with online service or leave a message,only take 1 minutes to tell us your needs, we will reply to you soon!
New Energy Lithium Ore Mining Process
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
