Production of: 700 tons of fine sand aggregate production line
Design output: 700 tons / hour
Production of raw materials: sand and gravel
Product categories: 10-20,5-10, sand, washed sand
Host equipment: Vibrating feeder ZG2050, jaw crusher PE, cone crusher, vibrating screen ZS3070, 2YKZ3070 * 6
Process: Large materials by vibrating feeder ZG2050 uniform, continuous sent to a jaw crusher PE1518 coarse crushing, rough crushed material is transported to a group of 2YKZ3070 shaker for screening, screening Large chunks of material were sent to a fine broken broken jaws, some were transferred to the hopper, and some were sent to a ZS3070 shaker sieve used to make the finished sand; the transfer hopper material was delivered A cone crusher crushing, crushing the material is sent to a group of 2YKZ3070 shaker for screening, screened 10-20 finished stones, the material is returned to crush again, small material is transported to the next group 2YKZ3070 vibration Sieve sieve, sieved after 5-10 and finished sand two kinds of materials
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
