Andesites (andesite) a neutral calc-alkaline rocks ejected. Its composition corresponds to diorite.
Andesite Sand Production Line with reliable performance, reasonable design, easy operation and high efficiency.
Andesite crushing production line process:
(Silo) -> feeder ->European Type jaw crusher -> Hydraulic cone crusher -> vibrating screen ->VSI5X Series impact crusher -> vibrating screen -> (which can be a finished product).
Andesite Ore Raw materials in the warehouse were fed via feeder jaw crusher crushing, then into the Hydraulic cone crusher for breaking or crushing, the crushed product is vibrating sieve, aniseed return cone crusher broken again to form a closed loop, less than 40mm break into the VSI5X Series sand making machines. Vertical break out of the expected impact vibrating sieve, more than 20mm of return VSI5X Series vertical impact crusher machine, to form a closed loop, less than 20mm of material delivered to the finished material stack through the belt, according to the cleanliness of the raw material can be considered 0 -5mm material sent to sand washing machine cleaning.
Andesite sand production line performance advantages:
The VSI5X Series Sand Making Machines technical personnel carefully developed andesite crushing production line with a reasonable configuration, high degree of automation, low running costs, high crushing ratio, energy saving, large output, easy maintenance, etc., out of the sand and gravel aggregate production line with the national construction sand standards, uniform particle size, grain shape is good, with the management.
The sand making crushing production line equipment configuration is mainly based on customer specifications and production of sand and sand use to make sure that we provide the program with and technical support, based on customer production site to the configuration process, and strive to provide our customers the most reasonable and economical production line.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
