The flow chart of gypsum powder production line: Large gypsum ores are crushed into small particles less then 30mm by crusher machine, and transported into grinding mill to grind. The products that meeting requirement is into fluidized bed furnace to roast, the others would be back to grinding mills again until qualified. The qualified gypsum powder would be into linker storage deposit or using in the products workshop.The product size is adjustable in the range of 80-425 meshes.
Bentonite Grinding Machines
Raymond Mill does apply to the grinding and processing in excess of 280 types of non-flammable and non-explosive materials with hardness less than 7 and humidity under 6% in mining, construction ,chemical industry and metallurgy, including barite, calcite, feldspar,talcum, marble, limestone, clay, glass. The fineness of the finished product may be adjusted from 100 mesh to 325 mesh based on requirements.
MTW Trapezium grinder is really a leading-world-level industrial mill. It is created by our personal engineers and technical workers, basing on industrial mill research of several many adopting world-leading-powder processing technology. Our machine adopts several advantages from numbers of mill around the globe, including flexible connection, roll linked pressure boost, etc.
Ultra fine mill is on the bases in our company’s production experience for longer than Fifteen years. We absorb advantags in the same trade abroad at home. We review, research and check out on 12 forms of mills and horizontal hammer crushers. Last but not least we developed this high-efficiency and low-cost super thin mill by investigation and trial.
Bentonite powder production line of Liming Heavy Industry (Shanghai) has good quality and superior performance, and has been popular in the market. With the development of bentonite products industry, a variety of different uses of bentonite powder have also been applied.
Spodumene: According to the hard rock crushing process, the crushed product is generally 5-40mm, combined with different design requirements of customers, two-end or three-stage crushing, high-grade crushed products (above 4-5%) can be directly used in the metallurgical process to produce lithium carbonate Or lithium hydroxide, the particle size of the finished product is generally around 20-40mm; low-grade generally requires ball mill grinding and separation, and the particle size of the finished product is generally around 5-20mm;
